We are one of the trusted Manufacturers and Suppliers of Electroperm Magnetic Chuck for Milling Machine. These Electroperm Magnetic Chucks for Milling Machine do not require power continuously except for short period of activation and deactivation. They are suitable for thin and small jobs.
Feature :
Work holding device for surface grinding machines.
Magnetic flux is generated by one or two coils.
Accuracy as per IS : 8710 - 1978.
Magnetic pull is as per IS specification.
Mag - D - Mag with variable control unit allows to neutralize the residual magnetism precisely, using a microprocessor based control circuitry.
Variable supply to vary power which helps in alignment & removing of warpages of thin jobs.
Chuck is tested for Slippering force, Waterproof test, Temperature rise test, Electrical & Demagnetizing tests.
We also manufacture Special chucks to suit individual requirements.
Good quality & standard electrical accessories.
Each pole is having separate coil, as such very strong & even magnetic flux is generated.
Magnetic pull is 30-50% more then IS specification.
Also available in Longitudinal Poles.
Technical Specifications
Sr. No.
Cat No.
Size (mm)
Pole Gap (mm)
Pole Pitch
1.
UL-71401
450 L x 150 W x 100 H
15
40
2.
UL-71402
500 Lx 200 W x 100 H
15
40
3.
UL-71403
600 Lx 200 W x 100 H
15
40
4.
UL-71404
600 Lx 250 W x 100 H
15
40
5.
UL-71405
750 Lx 250 W x 100 H
15
40
6.
UL-71406
900 Lx 250 W x 100 H
15
40
7.
UL-71407
600 Lx 300 W x 100 H
15
40
8.
UL-71408
750 Lx 300 W x 100 H
15
40
9.
UL-71409
900 Lx 300 W x 100 H
15
40
10.
UL-71410
1000 Lx 250 W x 110 H
15
40
11.
UL-71411
1000 Lx 300 W x 110 H
15
40
12.
UL-71412
1500 Lx 250 W x 110 H
15
40
13.
UL-71413
1500 Lx 300 W x 110 H
15
40
14.
UL-71414
1500 Lx 400 W x 110 H
15
40
15 A.
-
"Ultra" MAG d - MAG with Variable Control Unit
-
Upto 1000L 2 Amp. Upto 1500L 3 Amp.
15 B.
-
"Ultra" MAG d -MAG with Variable Control Unit & Battery Back Up (20min)
